Impact Protection

Showing all 8 results

  • 360° Column Protector

    £323.00

    Specification:-

    • Height: 600mm
    • Outer Ø: 350mm
    • Inner Ø: 254mm 
    • Formed tube Ø: 48mm
    • Wall thickness: 2mm
    • Legs: Ø 33.7 x 2mm
    • Base plates: 115 x 32 x 5mm (Pre-drilled 2 holes)
    Quick View

  • Angled Corner Safety Barrier

    £238.00

    Angled corner safety barrier – 430mm

    Ideal to protect the corners of buildings or machinery from accidental vehicle damage.

    Quick View

  • BLACK BULL FLEX Heavy Duty Bollard

    159mm x 655 mm powder coated
    Clear
    Quick View

  • Forecourt Barriers

    £0.00
    Quick View

  • Pallet Racking Protection

    £61.13

    Specification:-

    • Width: 160mm
    • Heights: 400mm, 800mm and 1,200mm
    • Gauge: 5mm and 6mm
    • Profiles: Right-angle and ‘U’ profile

    Finishes: Powder coated yellow with black bands

    Quick View

  • Perimeter Barriers

    £78.60
    Galvanised L1000mm
    Galvanised L1500mm +£12.00 (Excl. tax: £10.00)
    Galvanised L2000mm +£16.80 (Excl. tax: £14.00)
    Galvanised & Painted L1000mm +£86.40 (Excl. tax: £72.00)
    Galvanised & Painted L1500mm +£110.40 (Excl. tax: £92.00)
    Galvanised & Painted L2000mm +£139.20 (Excl. tax: £116.00)
    Zinc & Painted L1000mm +£39.60 (Excl. tax: £33.00)
    Zinc & Painted L1500mm +£110.40 (Excl. tax: £92.00)
    Zinc & Painted L2000mm +£69.60 (Excl. tax: £58.00)
    Blue
    Black
    Green
    Red
    White
    Clear

    A simple and effective solution to delineate and protect areas. Available in three lengths of Ø 60 mm steel tube. Dimensions: Height: 300 mm. Made of Ø 60 mm, 2 mm gauge steel tube. Available in galvanized & painted finish or zinc primed & finished If installed within 5 miles of the coast, we strongly…

    Quick View

  • Stainless Steel ISP Protection Rail

    £97.50

    Specification:-

    Grade 304 Stainless Steel

    Stainless steel Satin Polish 240 grit finish

    Tube diameter 50mm

    Stainless Steel End Caps to terminate runs.

    Installation:

    Maximum position of 100mm from wall/glazing to back of extrusion

    Floor mounted with M10x80mm Expandable rawlshields and bolts

    Leg centres are typically 1.5metres

    Height of top rail is typically 165mm high

    Mark the floor with a chalk line and place the 1st base flange at the start of the run so it runs parallel with the rail

    Use the rail to mark the next position of the base flange & continue this process for remainder of run

    Floor mounted slide through legs must only be used where a concrete base or slab is available – DO NOT install into block work or tarmac

    For potted legs, a hole must be core drilled 150mm wide x 300mm deep. Hole to be backfilled with concrete & potted leg pushed into the concrete before it sets.

    Quick View

  • Trolley Guide Rail TGR Protection

    £57.00

    Specification:-

    •  Silver anodised aluminum extrusion with impact absorbing rubber insert
    •  Floor assembled
    •  Adjustable foot support – height 145-175mm
    •  Demountable “potted” foot option
    •  Corner modules create cleaner lines for columns & corners
      Fixing Guidelines:
    •  Fixed with M12 x 80mm expandable rawl shields & bolts
    •  Max distance between feet 1500mm
    •  Max distance from end or corner to first foot
      150mm
    •  100mm finished height from floor
    Quick View

End of content

End of content