Showing 49–60 of 61 results
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Picture14-300x300.png)
£78.00
peed bumps, are traffic calming devices designed to slow down vehicle speeds in residential areas, parking lots, or other areas where traffic needs to be controlled. They are physical obstacles placed on the road surface to force drivers to reduce their speed.
The purpose of speed humps is to enhance road safety by reducing vehicle speeds and promoting safer driving behavior. They are typically installed in areas with high pedestrian activity, near schools, or in neighborhoods where speeding is a concern.
This Ramp Kit enables traffic calming when required. Supplied with built-in cats eyes. These Kits are usually installed at Car Parks, Shopping Centres, and Private Businesses. There are two different heights of Speed Ramp 50mm and 75mm. Both are designed to enforce different speed restrictions 10MPH (50mm) and 5MPH (75mm).
These Speed Ramps are designed to withstand constant wearing and are manufactured with high-grade recycled PVC to ensure these ramps stay intact after years of use.
These kits are supplied with fixing bolts
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Stainless-Steel-ISP-Protection-Rail-300x300.png)
£97.50
Specification:-
Grade 304 Stainless Steel
Stainless steel Satin Polish 240 grit finish
Tube diameter 50mm
Stainless Steel End Caps to terminate runs.
Installation:
Maximum position of 100mm from wall/glazing to back of extrusion
Floor mounted with M10x80mm Expandable rawlshields and bolts
Leg centres are typically 1.5metres
Height of top rail is typically 165mm high
Mark the floor with a chalk line and place the 1st base flange at the start of the run so it runs parallel with the rail
Use the rail to mark the next position of the base flange & continue this process for remainder of run
Floor mounted slide through legs must only be used where a concrete base or slab is available – DO NOT install into block work or tarmac
For potted legs, a hole must be core drilled 150mm wide x 300mm deep. Hole to be backfilled with concrete & potted leg pushed into the concrete before it sets.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Picture1-300x300.png)
£92.50
Stainless Steel Retractable Belt Posts are a stylish method of queue management suitable for a wide variety of applications. They are highly adaptable to changing circumstances and requirements.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/02/Steel-Fencing-300x300.png)
Our fencing products are designed for a range of applications including security, decorative areas to boundary demarcation.
Available in any size to suit your requirements
Our mild Steel fencing is designed to BS1722-9:2006 as standard.
Fencing also available to BS EN 1176 / ROSPA for schools and playgrounds
We can make any fence to order
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/02/pixelcut-export-1677588461006-300x300.png)
£70.80
Product Specifications:
- Standard diameters: 76mm, 89mm, 101mm, 114mm, 127mm, 140mm, 168mm or 193mm.
- Overall lengths: 900mm, 1000mm, 1100mm, 1200mm, 1300mm and 1500mm.
- Fixing options: root-fixed, bolt down/base plate, removable.
- Galvanised 3mm Steel as standard – BSEN ISO 1461
- Anti ram core
- Reflective banding
- A wide range of powder coat Ral colours.
Installation
Bollards are supplied with welded fixing spikes to ensure firm ground anchorage. Excavate holes to depth of approx. 400mm x 300mm diameter and cast into concrete. Can be supplied with a base plate for bolting down or as a removable option, with sockets for locking in by padlock.
For a Full Installation Bespoke Requirements
Our bollards can be made to meet your needs with specific heights, diameters, colours, and finishes. Call us today to discuss your requirements.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Picture6-300x300.png)
£204.00
Steel Hoop Guards protect and segregate pedestrians, machinery, and other zones from works vehicles, falls etc.
Versatile and effective protection.
Highly visible finish.
Additional reinforcing crossbar.
Easily installed with bolts (supplied separately).
Applications:
Protection of pedestrian areas (entrances, exits etc.), machinery, dangerous zones, elevation changes, loading docks, hazardous areas, garage pits etc.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/image1-7-300x300.png)
We manufacture a full range of sign posts and structures suitable for a wide variety of highway applications. We are fully registered to BS EN ISO 9001 and our fabricators and welding procedures are independently certified to BS EN 287 and BS EN ISO 15614-1. All posts are manufactured to EN12899 and is fully registered…
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Picture2-300x300.png)
£875.00
By purchasing an additional latch post, you will be able to lock the swing gate barrier in the open position. The locking mechanism is protected by a security shroud.
The size of our gates are measured from inside of post to inside of post.
Standard RAL Colours available, should Colours be required that differ to the below, please contact us for pricing.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Picture11-1-300x300.png)
£825.00
A durable, robust litter bin that complements our street furniture range. The Timber Litter Bin has a capacity of 158 litres. Available in a choice of timbers and stain finishes.
Each bin has a removable galvanised steel liner and is drilled for draining. Liners are also pre-drilled to allow them to be padlocked to the frame; padlock available on request.
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Traditional-bench-300x300.png)
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/trolley-guide-rail-tgr-protection-300x300.png)
£57.00
Specification:-
- Silver anodised aluminum extrusion with impact absorbing rubber insert
- Floor assembled
- Adjustable foot support – height 145-175mm
- Demountable “potted” foot option
- Corner modules create cleaner lines for columns & corners
Fixing Guidelines:
- Fixed with M12 x 80mm expandable rawl shields & bolts
- Max distance between feet 1500mm
- Max distance from end or corner to first foot
150mm
- 100mm finished height from floor
Quick View
-
![](https://rjcinstallations.co.uk/wp-content/uploads/2024/01/Universal-Fixed-Height-Restrictor-300x300.png)
£1,250.00
Product Description The centre crossbar slides between the two horizontal bars so that the height restrictors width fits the installation right down to the centimetre. With our adjustable-height version, setting the desired height is simple. We offer a pre-installation kit separate from the height restrictor itself so that you can prepare your concrete surfaces in…
Quick View
End of content
End of content